상품명 | F-571 (Active Mounting Box − HDMI over Twisted Pair Transmitter for Floor Boxes) |
---|---|
제조사 | kramer(이스라엘) |
소비자가 | 930,000원 |
판매가 | 840,000원 |
상품코드 | P0000BCM |
배송방법 | 택배 |
배송비 | 3,000원 (50,000원 이상 구매 시 무료) |
수량 | ![]() ![]() |
SNS 상품홍보 | ![]() ![]() |
---|
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
The F−571 mounting box for Ackermann or Bettermann floor boxes is a DGKat™ twisted pair transmitter for HDMI signals. The unit converts an HDMI signal to a DGKat™ twisted pair signal that it transmits to a compatible twisted pair receiver.
▪ Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel).
▪ HDTV Compatible.
▪ HDCP Compliant.
▪ DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over
twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
▪ HDMI Support - 3D, Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS−HD.
▪ 3D Pass-Through.
▪ System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC−DGKat524 cable. Up to 90m (295ft) at 1080i, or up to
70m (230ft) at 1080p on shielded BC−DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC−DGKat7a23
cable.
▪ Cable - For optimum range and performance, use Kramer's BC−DGKat524, BC−DGKat623 or BC−DGKat7a23 cables. Note that the
transmission range depends on the signal resolution, graphics card and display used. The distance using non−Kramer CAT 5, CAT 6, and
CAT 7 cables may not reach these ranges.
▪ EDID PassThru - Passes EDID signals from source to display.
▪ Active Indication Reporting - Status LED lights red when receiving power only, orange when output and power are attached, and yellow
when both an active input and output are attached.
▪ Power Connect™ System - A single connection to the transmitter powers the receiver.
▪ Modular Expandability - Accommodates two single or one dual Kramer wall plate inserts (covered with blank inserts).
▪ Size - Suitable for mounting into Ackermann (GB) or Bettermann (DE) flush floor service units that accept GB2 and GB3 size boxes.
- INPUT : 1 HDMI connector.
- OUTPUT : 1 UTP on an 9−pin terminal block.
- BANDWIDTH : 4.95Gbps (1.65Gbps per graphic channel).
- COMPLIANCE WITH HDMI STANDARD : Supports HDMI and HDCP.
- POWER CONSUMPTION : 12V DC, 250mA (transmitter and receiver together).
- DIMENSIONS : 7.5cm x 15.7cm x 4.4cm (2.95” x 6.18" x 1.73") W, D, H.
- WEIGHT : 0.18kg (0.4lbs).
- INCLUDED ACCESSORIES : Power supply.
- OPTIONS : Kramer BC−DGKat524 (CAT 5 24 AWG), BC−DGKat623 (CAT 6 23 AWG) and BC−DGKat7a23 (CAT 7a 23 AWG) cables.